Skip to content

Guide

Drone detection explained

Drone detection is the use of sensors to find unmanned aircraft in the air, identify them and, where possible, locate the pilot. It is the first step of counter-UAS (C-UAS): you cannot assess or respond to a drone you have not detected.

No single sensor sees every drone. Each method picks up something different: a broadcast, a radio link, an image, a sound or a radar echo. Reliable detection comes from combining several methods and bringing them together in one picture.

Methods

Drone detection methods compared

Comparison of drone detection methods
MethodWhat it detectsPilot locationLimitations
Remote ID Skytrace coreThe identification signal that compliant drones broadcast: identity, position, altitude and the location of the pilot or take-off point.Yes, from the broadcastOnly works for drones that broadcast Remote ID. It can be missing on older, modified or home-built drones.
RF detection Skytrace coreThe radio link between a drone and its controller, including drones that do not broadcast Remote ID.Depends on the systemDrones flying a pre-programmed route without an active radio link are harder to detect.
Cameras Visual confirmation of what is in the air, and what it carries.NoNeeds line of sight. Range depends on light, weather and the size of the drone.
Acoustic sensors The sound of drone propellers.NoShort range, and less reliable in noisy places such as festivals or city centres.
Radar Objects in the air by their echo, including drones without any radio link.NoHas to tell drones apart from birds and clutter. Usually the most expensive option.
People in the field Sightings by guards, stewards or the public, with photo and position.SometimesCoverage depends on who is where, and how quickly reports reach the control room.

Sensor fusion

Why combine sensors?

Each method covers the blind spots of another. Remote ID gives identity and the pilot’s location but only for compliant drones. RF detection also finds drones that stay silent on Remote ID. Cameras confirm what an operator is looking at. People on the ground see what sensors miss.

Combining sources only helps if they end up in one place. A command and control (C2) platform such as Skytrace merges every detection into one track per drone, on one map, so operators see one drone instead of five alerts.

REMOTE IDRFCAMERAGUARDUAS-A · REMOTE IDUAS-B · NO REMOTE ID2/2 DRONES DETECTED
Visualisation, not the actual Skytrace platform. Switch sensor types off to see what each one catches.

Detection is only the start

Knowing a drone is there is not enough. You need to know whether it is a threat, who is flying it, and who goes to deal with it. That means zones and alerts, a way to assess and classify incidents, and a way to send the right person to the right place.

Skytrace connects detection to that response: operators see the full picture, guards receive dispatches on their phone with the Skytrace Guard app, and every flight is recorded for replay and reporting.

FAQ

Frequently asked questions

How does drone detection work?

Drone detection uses sensors that pick up what a drone gives off. Remote ID receivers read the identification broadcast that compliant drones send, including the position of the pilot. RF detection picks up the radio link between a drone and its controller, which also catches drones without Remote ID. Cameras and acoustic sensors add visual and sound-based confirmation. Skytrace combines all of these sources into one live map.

What is Remote ID?

Remote ID is a signal that a drone broadcasts during flight with its identity, position and altitude, and the location of the pilot or the take-off point. In the European Union, Remote ID is required for many drone classes. A Remote ID receiver lets you identify a drone and see where its pilot is.

Can you detect drones that do not broadcast Remote ID?

Yes. RF detection picks up the radio link between a drone and its controller, so drones that do not broadcast Remote ID, or have it switched off, are detected too. Cameras, acoustic sensors and reports from guards in the field add further layers.

Can Skytrace locate the drone pilot?

When a drone broadcasts Remote ID, Skytrace shows the location of the pilot on the map next to the drone. The control room can then send the nearest guard straight to the pilot, guided by the Skytrace Guard app.

Can I replay a drone flight afterwards?

Yes. Every flight is recorded and can be replayed in 3D on real terrain, with buildings and trees. The detailed view shows speed, climb rate, heading, height and the distance to the pilot at every moment, graphs them on a timeline and marks events such as dispatches. Flight data can be exported for the police, insurers or an investigation.

What is counter-UAS command and control?

Counter-UAS (C-UAS) covers everything used to detect, assess and respond to unmanned aircraft. Command and control (C2) is the layer that brings sensors, operators and field teams together in one picture and coordinates the response. Skytrace is a C2 platform for C-UAS operations.

Does Skytrace take drones down?

No. Skytrace detects, tracks and records drones and coordinates the response of your team, usually by reaching the pilot. Whether other countermeasures may be used depends on your role and on local law.

Do I need my own detection hardware?

No. Skytrace can supply, install and maintain the sensors, including Remote ID and RF detection. If you already have sensors or cameras, Skytrace integrates them so every source comes together on one map.

Can Skytrace be used for a temporary event?

Yes. For festivals and events, the sensor network is set up for the duration of the event and removed afterwards. Zones are drawn on the map, stewards use the Skytrace Guard app, and the team is ready without weeks of training.

Who uses Skytrace?

Skytrace is built for events and festivals, stadiums, venues, industrial sites, private security companies, critical infrastructure, defense, police, prisons, airports, border security, utilities and municipalities.

Is Skytrace built for European regulation?

Yes. Skytrace is designed around European drone regulation, including the Remote ID requirements that apply to drones in the European Union.

See Skytrace in action.

Request a demo